Victor’s ST900FC is a workhorse torch handle for oxy-fuel cutting and heating. It’s the current flow-control version of the classic 100-series design, built for reliability in fabrication shops, maintenance departments, and field repair work. This guide covers specs, performance details, and selection notes for welders and fabricators.
Key Takeaways
- Heavy-duty Victor 0381-1621 torch assembly
- Part of Victor’s ST900FC line with built-in Flash-Guard® check valves
- Compatible with standard Victor cutting attachments (CA1350, CA2460 series, etc.)
- Brass body, high-flow valves, rugged construction for shop or field use
- Solid choice for oxy-fuel cutting, gouging, and preheat/heating work
What the ST900FC Solves
1. Flashback protection
Built-in Flash-Guard® check valves help meet OSHA/ANSI recommendations for flashback prevention.
2. Consistent flow control
High-flow needle valves allow smoother oxygen/fuel metering than older economy torch bodies.
3. Shop-grade durability
Brass body and metal valve assemblies handle frequent usage, heat cycling, and impacts better than light-duty consumer torches.
Specs (per manufacturer data)
- Model: Victor ST900FC
- Part Number: 0381-1621
- Body Material: Brass
- Valves: High-flow needle valves
- Safety: Integrated Flash-Guard® check valves
- Fuel Compatibility: Oxy-acetylene (primary), oxygen/propane with proper tips
- Use Case: Cutting, heating, light gouging (with appropriate equipment)
Unknown specs: Overall length, maximum pressure ratings, included tip(s), packaging weight.
Verify: Victor spec sheet, ESAB/Victor product catalog, distributor listings.
Performance Notes
- Smooth oxygen/fuel adjustment for precise flame shaping
- Stable during sustained cutting and heating
- Good ergonomics and heat dissipation for extended shop use
- Works well with Victor’s 000–6 cutting tips for mild steel plate
- For propane use, ensure propane-rated tips are installed
Where to Buy
Amazon
- For heavy and medium duty industrial applications
- Gas type to be used with this system is an fuel gas type, 5 PSIG and above
- Built-in patented flashback arrestors
- Reverse flow check valves for added safety
- Hose connections are 9/16 to 18 inches unless noted
Last update on 2025-12-05 / Affiliate links / Images from Amazon Product Advertising API
Disclosure: This article contains affiliate links. As an Amazon Associate, I earn from qualifying purchases.
Comparison Table
| Model | Key Specs | Best For |
|---|---|---|
| Victor ST900FC (0381-1621) | Brass body, Flash-Guard check valves, high-flow valves | Oxy-fuel cutting & heating |
Safety Notes (ANSI/AWS References)
- Use flashback arrestors or check valves per ANSI Z49.1 and OSHA 1910.253.
- Open oxygen valves slowly to avoid pressure shock.
- Purge hoses before lighting the torch.
- Wear Z87.1-rated eye/face protection.
- Use fuel-specific tips — propane tips differ from acetylene tips.
FAQ
Does the ST900FC include a cutting attachment?
Yes, because this is a one piece torch. Most boxed assemblies include only the torch handle. Cutting attachments are typically sold separately.
Is it compatible with my existing Victor tips?
Yes — when used with the correct Victor cutting attachment. It uses 1 Series tips.
Can I run propane?
Yes. Use propane-rated cutting/heating tips and proper hose ratings.
Is this considered a heavy-duty torch?
Yes. The ST900FC is in Victor’s heavy-duty line.
Leave a Reply