Tag: consumables
-
MIG Contact Tip Burnback: Why Your Tip Welds Itself (And How to Fix It)
Intro Your MIG gun stops feeding wire mid-weld. You power down, open the feeder, and find the wire welded solid into the contact tip. This is contact tip burnback—and it costs you…
-
How to Fix MIG Contact Tip Burnback: Diagnosis & Solutions
Your MIG wire is burning back and fusing to the contact tip, stopping your weld cold. This happens when the wire arcs at the tip instead of at the workpiece—a sign of…
-
Title: Worn MIG Contact Tips Causing Porosity? Here’s the Fix
Intro Your MIG welds look porous. You’ve checked your gas flow, cleaned the base metal, and verified your settings—but the problem persists. The culprit is often sitting right at the end of…
-
Why Does My Stick Welding Electrode Keep Sticking? (Fix in 15 Minutes)
Your electrode sticks to the workpiece, the arc dies, and you’re left wrestling with the rod. This is one of the most common stick welding problems—and it’s fixable. Low amperage, poor ground…
-
Why Does My MIG Wire Keep Birdnesting? Diagnosis and Fix
If your MIG wire bunches up near the drive rolls, stop feeding and inspect the wire path. A restriction, incorrect rolls or poor wire support can make the wire buckle. Work through…
-
YESWELDER TIG Tungsten Manual Sharpener Holder (TSH-01): What It Does, What It Doesn’t, and Who It Fits
If your TIG arc is wandering, hard-starting, or “randomly” dipping out, tungsten prep is one of the first things to check. A consistent point isn’t magic—but it does remove one variable you…