Welding guides
Parts, troubleshooting, equipment, and life in the trade. Browse by topic or search below.
-
Why Stainless TIG Welds Sugar on the Back Side
Stainless TIG sugaring is heavy oxidation on the back side of the weld root. It usually happens when the hot root is exposed to oxygen because the purge is missing, weak, contaminated,…
-
3M Speedglas G5-02 Welding Helmet Support Guide: Fitment, Lens Protection, and Ordering Checks
The 3M Speedglas G5-02 Auto Darkening Welding Helmet is a professional welding helmet built around the Speedglas G5-02 platform. This support article is intended to help buyers confirm the correct helmet, understand…
-

Lincoln Electric Square Wave® 205 TIG Welder K5613-1: Fitment, Specs, and Ordering Guide
The Lincoln Electric Square Wave® 205 TIG Welder K5613-1 is a dual-voltage AC/DC TIG and AC/DC Stick welding power source built for aluminum TIG work, steel and stainless TIG work, and Stick…
-
How to Stop MIG Nozzle Spatter from Blocking Gas Coverage
MIG weld porosity is often blamed on shielding gas settings, but a blocked nozzle can cause the same problem. When spatter builds up inside the MIG gun nozzle, shielding gas flow can…
-
How to Fix an Unstable TIG Arc from Poor Tungsten Prep
A wandering TIG arc is often blamed on gas flow, amperage, or the machine. Those issues can matter, but the tungsten electrode is one of the first places to check. A contaminated,…
-
Why MIG Wire Burns Back Into the Contact Tip
MIG burnback happens when the welding wire melts into the contact tip instead of feeding cleanly into the weld puddle. It is a common shop problem because the symptom looks simple, but…
-

Welding Sleeve PPE: How to Stop Forearm Burns from Sparks and Spatter
Forearm burns are common when welding sleeves are too thin, too short, dirty, loose at the cuff, or matched to the wrong process. The right sleeve setup should cover exposed skin, overlap…
-
Why Carbon Arc Gouging Leaves Carbon Pockets in the Groove
Carbon Arc Gouging Carbon Pockets Troubleshooting Infographic Infographic showing root causes, fixes, verification notes, and safety reminders for carbon pockets left after air carbon arc gouging. Carbon Pockets After Gouging? Air Carbon…
-
Do I Need a Respirator If I Already Have a Fume Extractor?
A welding fume extractor reduces airborne fume at the source, but it does not automatically replace a respirator. The right answer depends on whether the extractor is capturing the plume before it…