Welding guides
Parts, troubleshooting, equipment, and life in the trade. Browse by topic or search below.
-
Why Your TIG Weld Is Getting Contaminated (And How to Fix It)
TIG contamination shows up as a dull, dirty weld, unstable arc, or blackened tungsten. It’s usually caused by poor shielding, dirty material, or tungsten issues, and it will quickly ruin weld quality…
-
Why Your MIG Weld Has Porosity (And How to Fix It Fast)
Porosity in MIG welds shows up as pinholes, surface bubbles, or internal voids that weaken the joint. It’s one of the most common—and preventable—issues in shop welding. The root cause is always…
-
Jackson Safety 14834 SC-6 Hard Hat Review: Basic Head Protection for Shop and Jobsite Use
Affiliate disclosure: This post may contain Amazon affiliate links. As an Amazon Associate, we may earn from qualifying purchases. Key Takeaways What Is the Jackson Safety 14834 SC-6? The Jackson Safety 14834…
-
Weldmark 13N26 TIG Collet Body Review: .040″ Replacement Parts for #9, #20, and #25 TIG Torches
If your TIG torch setup uses a #9, #20, or #25 style torch, the Weldmark 13N26 collet body is a small but important consumable to keep on hand. This 5-pack is made…
-
7018 Rod Sticking: Causes & Solutions
Struggling with 7018 rod sticking can turn a welding project into a frustrating ordeal, but with a few adjustments like tweaking the amperage and ensuring proper storage, you can achieve seamless, high-quality…
-
TIG Tungsten Contamination: Causes and Prevention Guide
TIG tungsten contamination can seriously undermine the quality of your welds, but with the right knowledge and precautions, you can ensure cleaner, stronger results. Discover the key causes of contamination and learn…
-
Why Your MIG Weld Has Porosity (and How to Fix It Fast)
Porosity in MIG welding shows up as pinholes or small voids in the weld bead. It weakens the weld and usually points to shielding gas failure or contamination. This guide breaks down…
-
Ground Clamp Replacement Guide: FGC200 200 Amp Clamp for Welding Setups
Why this matters A weak ground clamp causes arc instability, poor starts, and wasted time. If the clamp is loose, corroded, or undersized for the job, the machine cannot deliver a consistent…
-
TIG Gas Lens Compatibility Guide: 45V26 Gas Lens for WP-17, WP-18, and WP-26 Torches Why this matters If your TIG arc is wandering, the tungsten is overheating, or shielding gas coverage is…