Welding guides
Parts, troubleshooting, equipment, and life in the trade. Browse by topic or search below.
-
The Hood Becomes Yours One Job at a Time
A welding hood begins as safety equipment with no history. Work gives it habits, marks, and meaning—without changing the job it must do first.
-
ER347 TIG / GTAW Filler Metal: Filler Metal Finder Notes
ER347 TIG / GTAW filler metal is a stabilized stainless filler used in TIG welding support conversations for 321 and 347 stainless applications. Treat the filler metal listing as a selection starting…
-
Lincoln Electric KP2632-1, Magnum 100SG Barrel Liner: Product Breakdown
The Lincoln Electric KP2632-1 Magnum 100SG Barrel Liner is a replacement wear part for the Magnum 100SG spool gun. In wire-feed systems, liner condition matters because the liner guides the electrode wire…
-
ER312 TIG / GTAW Filler Metal: Filler Metal Finder Notes
ER312 TIG / GTAW filler metal is commonly used as a starting point for difficult repair work and some dissimilar metal applications. It is a high-alloy stainless filler choice, but it is…
-
Hypertherm 220976, Shield, Pack of (1): Replacement Part Breakdown
Hypertherm 220976, Shield, Pack of (1) is a replacement consumable support part for plasma cutting setups. For buyers and maintenance teams, the key question is not only whether the part is available,…
-
Lincoln Electric KP2744-040 Copper Plus Contact Tip 350A .040 in (1.0 mm), 10 pack: Product Breakdown
The Lincoln Electric KP2744-040 Copper Plus Contact Tip 350A .040 in (1.0 mm), 10 pack is a MIG consumable used to transfer current to the electrode wire at the gun front end.…
-
Four Arcs, Four Ways of Working
MIG, TIG, Stick, and flux-core do more than move heat and filler metal differently. Each process creates its own pace, feedback, and way of paying attention.
-
Lincoln Electric KP2744-025 Copper Plus Contact Tip 350A.025 in (0.6 mm), 10 pack: Product Breakdown
The Lincoln Electric KP2744-025 Copper Plus Contact Tip 350A.025 in (0.6 mm), 10 pack is a fine-wire MIG consumable intended to carry welding current from the gun tip to the wire with…
-
Weldas Aluminized Back Hand Pad with Kevlar Stitching – Heat Deflector, Pack of (1): Replacement Part Breakdown
Plasma cutting support parts fail in predictable ways. Heat, spatter, abrasion, and repeated glove removal all wear out the same areas first. The Weldas Aluminized Back Hand Pad with Kevlar Stitching –…
-
ER317L TIG / GTAW Filler Metal: Filler Metal Finder Notes
ER317L TIG / GTAW filler metal is a molybdenum-bearing stainless filler used as a starting point for 317-family stainless applications where corrosion resistance is a concern. It is not a stand-alone welding…