Wera Tool-Check PLUS 1: Tight-Access Ratchet Kit Checks

The Wera Tool-Check PLUS 1 (manufacturer number 05049055001) is a compact manual-service bit ratchet and socket kit for confined fasteners, not a substitute for a torque wrench, powered driver or machine-specific service procedure. The 39-piece package brings a small ratchet, bits, sockets and holders together. It makes sense only when those drive types and socket sizes match the fasteners you actually need to service.

The main shop-floor problem is reach. A standard screwdriver handle can be too long to clear a cabinet, welding-table accessory or piece of maintenance equipment, while a traditional socket handle may be bulky. The small ratchet can help with access after equipment is shut down and made safe according to the relevant procedure. Its compact size does not eliminate electrical, stored-energy or unexpected-motion hazards.

As an Amazon Associate I earn from qualifying purchases.

Last update on 2026-10-30 / Affiliate links / Images from Amazon Product Advertising API

Check the newer PLUS 1 number, not an old Tool-Check PLUS listing

Wera markets several similarly named Tool-Check kits. The current Tool-Check PLUS 1 product page identifies manufacturer number 05049055001 with a 39-piece package. The older Tool-Check PLUS number 05056490001 is a different listing with a replacement generation noted in the manufacturer’s documentation. A picture or title saying merely ‘Tool-Check PLUS’ is not enough to determine which version you will receive.

The exact Amazon identifier reviewed here is B0DYP6Z6G1, identified by a current marketplace product record as Wera Tool-Check PLUS 1 with EAN 4013288234896. Compare both the 05049055001 manufacturer part number and the package photo on the seller’s active offer; marketplace data and seller bundles can change after an article is written. If the identifiers disagree, pause the order rather than assuming the same bits are inside.

What a compact 39-piece kit contains

Wera’s PLUS 1 kit is a mix of a Zyklop Mini bit ratchet with 1/4-inch bit interface, Kraftform bit-holding handle, Rapidaptor bit holder, adapter, sockets and replaceable drive bits. It is not 39 different socket sizes. Some counted pieces are individual bits or holders. Inspect the manufacturer’s itemized contents for every needed profile, including Phillips, Pozidriv, Torx, slotted and hex.

The sockets use a 1/4-inch square-drive arrangement through the included adapter. Check whether your fasteners are external hex, internal hex, Torx or another profile. A Torx bit cannot correctly substitute for an internal-hex key merely because it seems to wedge into the head. The wrong profile risks damaged hardware, lost inspection traceability and avoidable rework.

• Write down the actual fastener head, profile and size from the parts documentation or a properly identified sample.
• Identify whether the job needs a bit in a recess or a socket on an external hex head.
• Verify the included sizes in Wera’s manufacturer contents list; do not infer one just from the 39-piece count.
• Check physical clearance for both the tool head and the operator’s hand, not just the screw opening.
• Confirm the fastener’s prescribed final torque and inspection method separately; use the approved calibrated tool where required.

Why the small ratchet can help—and where it cannot

A fine-tooth ratchet moves through a small return angle, which is useful when the handle cannot sweep freely. Wera lists a 60-tooth mechanism and a six-degree return angle for the PLUS 1. Those specifications describe tool motion, not the torque required for any particular welding machine cover, fixture clamp or gas-system component.

Service fasteners sometimes secure safety-related parts. A compact ratchet is for appropriate ordinary fastening or removal, not for bypassing a locked enclosure, opening energized equipment, applying a calibrated torque without measurement, or exceeding the fastener manufacturer’s limits. Where the equipment manual specifies a particular service tool or qualified technician, use that requirement instead.

Keep a real screwdriver and correctly sized conventional ratchet available for cases where alignment, leverage or reach makes the mini-ratchet inappropriate. The Tool-Check PLUS 1 is an accessory for a focused service kit, not an entire maintenance tool inventory. If the same machine is serviced every week, buy to that recurring fastener pattern rather than the impressive-looking number of bits.

How to judge a shop purchase

Ask whether the kit will live in a designated equipment toolbox, a maintenance cart or a mobile technician’s bag. Compact cases reduce loose-part handling, but bits still need to be checked back into their original locations after work. A complete case at checkout can become a missing-bit problem on the second repair if the shop has no return/accountability routine.

Consider an honest ‘do not buy’ case: a shop using primarily 3/8-inch drive sockets, large structural bolts or specialty insulated drivers may get little value from a 1/4-inch bit-and-small-socket collection. Likewise, if a job requires a factory-specific pin or locking feature, the generic Wera set may not contain it. Match the actual service parts list before committing.

Order and receiving checklist

• Read the seller’s current listing for Wera 05049055001 and the matching current EAN; do not accept an unmarked older PLUS kit as the same package.
• Confirm a 39-piece metric configuration—not the similarly named Imperial variant or a kit missing the socket adapter.
• Match included bits and sockets to the service fastener inventory and clearances.
• Inspect the case and included pieces on receipt and retain the seller’s order record.
• Use the machine manufacturer’s isolation, service and torque instructions independently of this accessory selection.

For the exact reviewed version, check the current Wera Tool-Check PLUS 1 Amazon offer. The live AAWP box above should show the same variant; if its product data is missing or mismatched, the product-specific affiliate presentation is incomplete until checked. Prices and availability are intentionally omitted because they can change.

For related shop buying decisions, WSP’s fit-up reference guide discusses the importance of the correct reference, and the Filler Metal Finder illustrates why exact variants matter in a different product family. For a broader look at fabrication craft, explore Arc Life.

Bottom line: buy this kit for specific restricted-access bit and small-socket jobs, with the exact newer manufacturer part verified. Do not buy it based on a generic Tool-Check name, a guessed fastener size or an expectation that the kit replaces calibrated or safety-specific tooling.