The DEWALT D28715 is a 14-inch abrasive chop saw built around a 15-amp motor, a tool-free wheel-change system, a 45° adjustable fence, and a quick-lock vise. The buying question for a fabrication shop is not whether it cuts metal—it does. The question is whether an abrasive chop saw fits your material, cut quality, spark/heat tolerance, consumable cost, and workflow better than a carbide cold-cut saw or portable band saw.
What DEWALT publishes for the D28715
DEWALT identifies the D28715 as a 14-inch chop saw with its QUIK-CHANGE keyless blade-change system. The manufacturer lists a 15-amp motor, a tool-free 45° Quick-Fence, a quick-lock vise, and a large cutting capacity of 5 inches round or 4-1/2 x 6-1/2 inches rectangular. The included package contains the saw, a 14-inch abrasive wheel, fence wrench, and tool-free flange system.
Abrasive saw versus cold-cut saw
The D28715 uses an abrasive wheel rather than a toothed carbide cold-cut blade. That difference affects the whole ownership experience. Abrasive cutting normally produces more sparks and heat, the wheel wears down as it is used, and the cut may require more cleanup than a high-quality cold-cut system. On the other hand, abrasive wheels are widely available and the saw is built around a simple, familiar cutting process used in many shops and jobsites.
Do not decide from blade diameter alone. Compare the actual material you cut, the finish you need, how often you make miter cuts, how much cleanup is acceptable, and what replacement consumables cost in your area.
Capacity is the first hard limit
DEWALT’s published 5-inch round and 4-1/2 x 6-1/2-inch rectangular capacities give you a useful boundary. Measure the largest tube, pipe, angle, channel, or rectangular stock you routinely cut and compare it with those limits. If your common work is near the machine’s maximum, also think about clamp access and how easily the workpiece can be supported at the desired angle.
The quick-change system matters if the saw works every day
Abrasive wheels are consumables, so wheel changes are part of normal use. DEWALT’s QUIK-CHANGE system is designed to let the operator change the wheel without a wrench. That feature has more value in a production or busy maintenance environment than it does in a shop that makes only a few cuts per month.
The fence and vise define the setup speed
The D28715 includes a tool-free 45° adjustable fence and a quick-lock vise. Those features are aimed at reducing setup time when stock size or cut angle changes. They do not replace layout accuracy. For repeated cuts, verify the first piece, control stock support, and use stops or fixtures only when they are appropriate for the saw and work. DEWALT notes that the solid steel base can be bolted to a workbench and can support welded jigs or stops.
What this saw asks from the shop
- Stable support: long stock needs infeed/outfeed support so it does not twist against the wheel or vise.
- Spark management: abrasive cutting creates a hot spark stream. Keep combustibles and people out of the discharge path and follow the saw manual and shop hot-work controls.
- Wheel inspection: use only wheels that meet the manufacturer’s size and speed requirements, and inspect them before use.
- Cut cleanup: expect more heat and burr cleanup than a true cold-cut saw in many materials.
- Bench space: this is a stationary chop-saw workflow; field cuts or installed material may point toward a portable saw or another process.
When the D28715 is a strong fit
The D28715 makes the most sense when you want a heavy-duty abrasive chop saw for repeated cuts in movable metal stock, your material fits the published capacity, and your shop already has a safe place for spark-producing cutting. It is also attractive when tool-free wheel changes and a fast-adjusting fence/vise can save setup time.
When to compare something else
Compare a carbide cold-cut saw if low-heat, lower-burr cuts are a major priority. Compare a portable band saw if the work often stays in place or must be cut away from a bench. Compare a larger saw or different process if your common stock exceeds the D28715’s capacity. The best saw is the one whose cutting method and capacity match the work you actually do.
Amazon listing
The exact Amazon identifier verified for the DEWALT D28715 listing is ASIN B000HHWWES. Arc Weld did not have an exact D28715 product match at the check for this article, so the Amazon path does not displace an identical stocked Arc Weld item.
As an Amazon Associate I earn from qualifying purchases.
- Powerful 15 amp/5.5 HP (maximum motor HP) motor provides more overload capacity, increasing performance and durability
- Quik-change keyless blade change system increases productivity by providing the user the ability to change wheels without a wrench
- Exclusive QUICK-FENCE is a 45-degree, adjustable fence designed for fast and accurate angle cuts without using a wrench
- Quick-lock vise allows for fast clamping on different size materials to increase productivity
- Ergonomically designed “D” handle provides a more comfortable hand position, reducing fatigue and increasing productivity
Last update on 2026-10-07 / Affiliate links / Images from Amazon Product Advertising API
Bottom line
The DEWALT D28715 is a straightforward heavy-duty abrasive chop saw with useful setup features and a clearly published cutting envelope. Buy it because abrasive cutting, its capacity, and its quick-change workflow fit your shop—not because a 14-inch saw is automatically the right answer for every fabrication task.
Sources
Featured image is contextual metal-cutting shop imagery and is not presented as a photograph of the DEWALT D28715.
Leave a Reply