Welding guides
Parts, troubleshooting, equipment, and life in the trade. Browse by topic or search below.
-
Why Stainless Welds Lose Corrosion Resistance
Stainless steel can lose corrosion resistance after welding when the weld area is overheated, not cleaned properly, or matched with the wrong filler. The base metal may still be stainless, but the…
-
Drill Bit Chatter When Drilling Steel
Drill Bit Chatter When Drilling Steel Drill bit chatter in steel usually points to a setup problem, a tool condition problem, or both. The bit is not cutting smoothly, so it starts…
-
Abrasive Cut-Off Wheel Not Lasting Long
Abrasive Cut-Off Wheel Not Lasting Long If a cut-off wheel wearing fast is a recurring problem, the issue is usually not the wheel alone. Excess pressure, wrong wheel type, side loading, poor…
-
VEVOR Retractable Welding Hose Reel Review: 50 ft Oxy-Acetylene Shop Setup
The VEVOR retractable welding hose reel for ASIN B0DTTJFB72 is a high-intent shop organization product for oxy-fuel users who want a cleaner hose path, less floor clutter, and faster torch setup. The…
-
VEVOR Welding Cart Review: 2-Drawer Welder Cart Setup, Fitment, and Safety Checks
The VEVOR 2-drawer welding cart is a buyer-intent shop upgrade for welders who are tired of storing a MIG welder, TIG machine, plasma cutter, leads, clamps, gloves, tips, nozzles, flap discs, and…
-
Why TIG Arc Wanders or Starts Hard
TIG arc wandering and hard starts call for a systematic check of the work connection, tungsten preparation, shielding gas and torch consumables. Start with the machine and torch manuals, identify the affected…
-
Lincoln Electric FlexCut 45 Plasma Cutter Troubleshooting, Consumables, and Air Supply Setup
Troubleshooting guide for the Lincoln Electric FlexCut 45 plasma cutter covering arc transfer issues, consumable wear, air supply problems, cut quality issues, and setup verification.
-
TIG Torch Gets Too Hot During Welding
TIG Torch Gets Too Hot During Welding If you are dealing with tig torch overheating, treat it as a setup or duty-cycle problem first. Excess heat at the torch can damage the…
-
Why Flux-Cored Wire Is Producing Worm Tracks (And How to Stop It)
Worm tracks in flux-cored welding are narrow, winding surface marks that usually show up on or beside the weld bead after the slag is removed. They are not normal bead texture. In…
-
How to Identify and Replace Compatible TIG Torch Consumables for Optimal Welding Performance
Correct TIG torch consumables affect arc stability, shielding gas coverage, tungsten control, heat handling, and weld consistency. The wrong collet, cup, gas lens, back cap, or tungsten size can cause poor starts,…