**8018-C3 vs 8018-W Stick Electrodes: Product Review & Buying Guide**

When it comes to welding low-alloy steels, choosing the right stick electrode is crucial for achieving strong, reliable welds. Two popular options—8018-C3 and 8018-W—offer distinct advantages depending on your project’s requirements. Here’s a detailed comparison to help you make an informed decision.

—

**Performance**

*8018-C3* electrodes are renowned for their excellent mechanical properties, especially at low temperatures. They provide high ductility and impact strength, making them ideal for critical structural applications. The arc is stable, and slag removal is generally easy, resulting in smooth, clean welds.

*8018-W* electrodes are specifically designed for welding weathering steels (like ASTM A588 and A242). They offer good weldability and produce welds that match the corrosion resistance of the base metal. The arc is smooth, and the slag is easy to remove, but the welds may not be as tough at low temperatures as those made with 8018-C3.

—

**Composition**

*8018-C3* contains about 1% nickel, which enhances toughness and low-temperature performance. This makes it suitable for applications where the weld will be exposed to cold environments or dynamic loading.

*8018-W* is alloyed with small amounts of copper and other elements to match the composition of weathering steels. This ensures that the weld metal develops a protective oxide layer, just like the base metal, for superior atmospheric corrosion resistance.

—

**Applications**

*8018-C3* is best suited for structural welding in bridges, buildings, and pressure vessels, especially where low-temperature service is expected. It’s also a good choice for heavy equipment repair and fabrication.

*8018-W* is the go-to electrode for welding weathering steels used in outdoor structures, such as bridges, transmission towers, and architectural features. Its corrosion resistance makes it ideal for projects exposed to the elements.

—

**Pros and Cons**

*8018-C3 Pros:*
– Excellent low-temperature toughness
– High ductility and strength
– Versatile for various structural applications

*8018-C3 Cons:*
– Not specifically designed for weathering steels
– Slightly higher cost due to nickel content

*8018-W Pros:*
– Matches corrosion resistance of weathering steels
– Good weldability and appearance
– Ideal for outdoor structures

*8018-W Cons:*
– Lower impact toughness at low temperatures
– Limited to weathering steel applications

—

**Who Should Buy Which?**

Choose *8018-C3* if you need superior toughness and strength, especially in cold climates or for critical structural work. Opt for *8018-W* if you’re working with weathering steels and require welds that will resist atmospheric corrosion over time.

—

**What Makes Them Unique**

*8018-C3* stands out for its low-temperature performance, while *8018-W* is unique in its ability to match the corrosion resistance of weathering steels. Both offer reliable weldability and are trusted by professionals for their respective applications.

—

**Conclusion**

Selecting between 8018-C3 and 8018-W depends on your project’s specific needs—whether it’s low-temperature toughness or corrosion resistance. Both are excellent choices within their domains, ensuring strong, durable welds.
We may earn a small commission through Amazon affiliate links, at no extra cost to you.

Washington Alloy 8018-C3 10lbs Welding Stick Electrode (1/8″)

• AWS: A5.5
• 10 LB Package – 8018-C3
• 1/8″ Stick Electrode
• Tensile Strength (psi) 80,000
• Yield Strength (psi) 68-80,000

$99.38

Buy on Amazon

Last update on 2026-01-19 / Affiliate links / Images from Amazon Product Advertising API

MIG Welding Mild Steel: Optimal 70S-6 Settings for Strong, Clean Welds

Introduction

MIG welding mild steel with ER70S-6 wire is a common process in fabrication, repair, and manufacturing due to its efficiency and versatility. Achieving strong, clean welds requires selecting the correct settings for your welding machine. Key parameters include wire diameter, voltage, amperage, wire feed speed, and shielding gas composition. For 70S-6 wire, which contains higher levels of deoxidizers for improved weld quality on slightly contaminated or rusty steel, recommended settings vary based on material thickness and welding position. Proper adjustment of these variables ensures optimal penetration, minimal spatter, and a smooth, consistent weld bead.

Shielding Gas Selection And Flow Rates For 70S-6 Wire On Mild Steel

When MIG welding mild steel with 70S-6 wire, the selection of shielding gas and the adjustment of flow rates are critical factors that directly influence weld quality, appearance, and overall process efficiency. Shielding gas serves the essential function of protecting the molten weld pool from atmospheric contamination, which can lead to defects such as porosity, excessive spatter, and weak welds. Therefore, understanding the appropriate shielding gas mixtures and their optimal flow rates is fundamental for achieving consistent and high-quality results when working with 70S-6 wire on mild steel.

The most commonly used shielding gas for MIG welding mild steel with 70S-6 wire is a mixture of argon and carbon dioxide. The standard blend, often referred to as C25, consists of 75% argon and 25% carbon dioxide. This mixture strikes a balance between arc stability, penetration, and minimal spatter, making it highly suitable for a wide range of applications. The argon component provides a smooth, stable arc and helps produce a clean, aesthetically pleasing weld bead, while the carbon dioxide enhances penetration and improves the mechanical properties of the weld. For applications where deeper penetration is required, a higher percentage of carbon dioxide, such as an 80/20 or even 100% CO₂, may be used. However, it is important to note that increasing the carbon dioxide content can lead to a rougher weld appearance and increased spatter, which may necessitate additional post-weld cleaning.

In addition to the argon-carbon dioxide blends, some specialized applications may call for the use of tri-mix gases, which incorporate small amounts of oxygen or helium. These mixtures can further refine arc characteristics and bead appearance, but for most general mild steel welding with 70S-6 wire, the 75/25 argon-carbon dioxide blend remains the preferred choice due to its versatility and cost-effectiveness.

Once the appropriate shielding gas has been selected, attention must be given to setting the correct flow rate. The flow rate is typically measured in cubic feet per hour (CFH) and is a crucial parameter that ensures adequate coverage of the weld pool without excessive turbulence. For MIG welding mild steel with 70S-6 wire, a flow rate in the range of 20 to 30 CFH is generally recommended. This range provides sufficient shielding under most conditions, including indoor environments with minimal air movement. However, if welding is performed outdoors or in areas with significant drafts, it may be necessary to increase the flow rate slightly to compensate for the potential loss of shielding gas coverage. Conversely, setting the flow rate too high can create turbulence, drawing in atmospheric air and leading to contamination of the weld.

It is also important to regularly inspect the gas delivery system for leaks or blockages, as these can compromise shielding effectiveness regardless of the flow rate setting. Using a flowmeter rather than relying solely on regulator pressure gauges can help ensure accurate and consistent gas delivery. By carefully selecting the appropriate shielding gas mixture and maintaining the recommended flow rates, welders can optimize the performance of 70S-6 wire on mild steel, resulting in strong, clean, and visually appealing welds. This attention to detail not only enhances the quality of the finished product but also contributes to greater efficiency and reliability in the welding process.

Optimizing Voltage And Wire Feed Speed For 70S-6 MIG Welding

When it comes to MIG welding mild steel with 70S-6 wire, achieving optimal results depends heavily on selecting the appropriate voltage and wire feed speed settings. These two parameters work in tandem to control the heat input, penetration, and overall quality of the weld. Understanding how to fine-tune these settings is essential for both novice and experienced welders seeking consistent, high-quality welds.

To begin with, voltage in MIG welding primarily influences the arc length and the shape of the weld bead. A higher voltage setting produces a flatter, wider bead with less penetration, while a lower voltage results in a narrower, more convex bead with deeper penetration. For 70S-6 wire, which is known for its excellent deoxidizing properties and ability to handle mill scale or slightly rusty surfaces, the recommended voltage range typically falls between 16 and 22 volts for most mild steel applications. However, the exact voltage required will depend on the thickness of the material being welded. For thinner materials, such as 1/8 inch (3.2 mm) or less, a voltage setting on the lower end of this range is advisable to prevent burn-through. Conversely, thicker materials may require higher voltage to ensure adequate fusion and penetration.

Wire feed speed, on the other hand, determines the rate at which the filler metal is supplied to the weld pool. This setting directly affects the amperage, which in turn influences the heat input and deposition rate. For 70S-6 wire, the wire feed speed should be matched to the selected voltage and the diameter of the wire being used. For example, when using a common wire diameter such as 0.030 inch (0.8 mm), a typical starting point for wire feed speed might be around 300 inches per minute (ipm) for welding 1/8 inch mild steel at approximately 18 volts. As the material thickness increases, both the voltage and wire feed speed should be increased proportionally to maintain a stable arc and achieve the desired weld profile.

It is important to note that the relationship between voltage and wire feed speed is not linear; rather, they must be balanced to avoid common welding defects. If the wire feed speed is set too high relative to the voltage, the result may be excessive spatter, poor arc stability, and a lack of fusion. Conversely, if the voltage is too high for the given wire feed speed, the arc may become erratic, leading to undercutting or a lack of penetration. Therefore, it is advisable to consult the manufacturer’s recommended settings as a baseline and then make incremental adjustments based on the specific welding conditions.

In addition to these primary settings, factors such as shielding gas composition, travel speed, and torch angle also play a role in the final weld quality. However, by focusing on optimizing voltage and wire feed speed for 70S-6 MIG welding, welders can significantly improve their control over the welding process. Regular practice, combined with careful observation of the weld bead and sound, will further aid in fine-tuning these parameters. Ultimately, mastering the interplay between voltage and wire feed speed is key to producing strong, clean welds on mild steel with 70S-6 wire.

Essential MIG Welding Settings For 70S-6 Wire On Mild Steel

When it comes to MIG welding mild steel, selecting the appropriate settings is crucial for achieving strong, clean welds. The 70S-6 wire is a popular choice among welders due to its excellent deoxidizing properties and ability to handle mill scale or slightly rusty surfaces. However, to fully leverage the benefits of this wire, it is essential to understand and apply the correct MIG welding settings. These settings include voltage, wire feed speed, shielding gas composition, and other key parameters that directly influence weld quality.

To begin with, the voltage setting plays a significant role in determining the arc characteristics and penetration. For 70S-6 wire on mild steel, the recommended voltage typically ranges from 16 to 22 volts, depending on the thickness of the material being welded. Thinner materials, such as 1/16 inch (1.6 mm), generally require lower voltages around 16 to 18 volts, while thicker sections up to 1/4 inch (6.4 mm) may necessitate voltages closer to 20 to 22 volts. Adjusting the voltage within this range helps maintain a stable arc and prevents issues such as excessive spatter or lack of fusion.

Equally important is the wire feed speed, which controls the amount of filler metal delivered to the weld pool. For 70S-6 wire, the wire feed speed should be matched to the voltage and material thickness. As a general guideline, a wire feed speed of 150 to 300 inches per minute (IPM) is suitable for most mild steel applications. For example, welding 1/8 inch (3.2 mm) mild steel with 0.030 inch (0.8 mm) diameter wire typically requires a wire feed speed of around 200 to 250 IPM. Fine-tuning the wire feed speed ensures proper bead shape and penetration, while also minimizing the risk of burn-through or cold lap.

In addition to voltage and wire feed speed, the choice of shielding gas is another critical factor. The most common shielding gas mixture for MIG welding mild steel with 70S-6 wire is 75% argon and 25% carbon dioxide (C25). This blend offers a good balance between arc stability, spatter control, and weld appearance. For applications where deeper penetration is required, a higher percentage of carbon dioxide, such as 100% CO2, can be used, though this may result in increased spatter and a slightly rougher bead. The recommended gas flow rate typically falls between 20 and 30 cubic feet per hour (CFH), ensuring adequate coverage of the weld area.

Furthermore, selecting the correct wire diameter is essential for optimal performance. The most commonly used diameters for 70S-6 wire are 0.023 inch (0.6 mm), 0.030 inch (0.8 mm), and 0.035 inch (0.9 mm). Thinner wires are better suited for lighter gauge materials, while thicker wires are preferable for heavier sections. Matching the wire diameter to the application helps maintain control over the weld pool and reduces the likelihood of defects.

Finally, it is important to consider travel speed and electrode extension, as these parameters also impact weld quality. Maintaining a consistent travel speed and keeping the electrode extension between 3/8 and 1/2 inch (10-13 mm) helps produce uniform welds with minimal porosity. By carefully adjusting these essential MIG welding settings for 70S-6 wire on mild steel, welders can achieve strong, aesthetically pleasing welds that meet the demands of a wide range of fabrication projects.

Conclusion

In conclusion, MIG welding mild steel with 70S-6 wire requires careful selection of settings to achieve optimal results. Recommended parameters typically include using a shielding gas mixture of 75% argon and 25% CO₂, a wire diameter of 0.030″–0.035″, voltage settings between 17–22 volts, and wire feed speeds ranging from 200–400 inches per minute, depending on material thickness. Proper adjustment of these settings ensures good penetration, minimal spatter, and strong, clean welds on mild steel.