The ESAB Rogue ES 201iP PRO, part 0705002022, is a portable Stick/Lift TIG inverter with 120/230-volt input. ESAB’s output ratings differ between those supplies. Check the circuit available at the job—not just the “200 amp” headline. This is a manufacturer-based buyer brief, not a hands-on review.
Built for Real-World Conditions
- IP23S enclosure classification: follow ESAB’s operating restrictions; this is not a dustproof rating or permission to weld in wet conditions.
- Dual‑voltage (120 V / 230 V): perfect for field flexibility.
- Hot Start + Arc Force: makes arc striking fast and steady even on tricky rods.
- Lift‑TIG capability: adds light‑fabrication versatility without upgrading to a dedicated TIG rig.
ESAB lists a machine weight of 18.2 lb. Leads, accessories, and any TIG gas equipment add to the complete setup.
Compare the correct rating
ESAB lists 200A at 25% duty cycle on 230V and 110A at 25% on 120V for Stick welding. Use the full manufacturer table for other duty cycles and the owner’s manual for circuit requirements.
- Confirm the input voltage and available circuit.
- Check current and duty-cycle requirements for the work.
- Confirm included leads and any separately required TIG accessories.
Compare the total package your jobs require, including any separately purchased accessories. Machine price alone can make two very different setups look equivalent.
Who It’s For
- Maintenance welders needing a lightweight, dependable field machine
- Farm / ranch operations repairing gates, implements, and heavy steel
- Trade students wanting a compact unit that can grow with them
Check the exact model and package
Check the ESAB Rogue ES 201iP PRO listing at ArcWeld.Store:
Keep the details for your next job
Write down the input supply at each work location before comparing portable welders. A dual-voltage machine does not deliver the same maximum output on both supplies.
Download the free equipment and attached-tool record (PDF) — no signup required.
Read next
- Cable size and circuit length — Plan leads from the documented requirements.
- Connector identification — Check the receptacle and cable assembly before ordering.
Need a replacement? Start with parts identification before ordering. A lookup result is not manufacturer confirmation of compatibility.
Manufacturer references
Updated September 24, 2026: buyer-check information and related resources revised by Weld Support Parts. Manufacturer references are identified above where checked; this is not an independent product test, a welding procedure, or verification of every accessory on the page. Report a correction or suggest a guide.
Leave a Reply