The Black Stallion GX100M, Medium Tool Handz Anti-Vibration Mechanic’s Gloves, Pack of (1) B007RFBRXU is a hand-protection item used for general shop work, maintenance tasks, and impact-prone hand tool handling. For buyers and maintenance teams, the main question is not just whether the glove fits, but whether it matches the job, the hand size, and the wear conditions in your shop.
This guide focuses on practical selection, inspection, and support considerations. It does not assume undocumented performance claims. Any technical detail not verified here should be treated as Unknown (Verify).
Key Takeaways
- Use the glove for the task it is intended to support, not as a substitute for task-specific PPE.
- Fit matters. A glove that is too loose can reduce control; one that is too tight can limit dexterity.
- Anti-vibration naming does not replace a full hazard review. Verify the tool, exposure duration, and required controls.
- Inspect each glove before use for wear, tears, seam failure, and reduced grip surface.
- If you need exact material build, padding layout, or standards compliance, verify against the product listing or supplier documentation. Unknown (Verify).
What This Product Is, and What to Verify
The product title identifies a medium-size Black Stallion GX100M Tool Handz anti-vibration mechanic’s glove, sold as a pack of one. Beyond that, several technical details are not confirmed in the source set provided here. Those details are Unknown (Verify), including:
- exact palm and back-of-hand material
- padding type and thickness
- cuff style
- touchscreen capability
- certifications or standard ratings
- country of origin
For purchasing, treat the title as the starting point and verify the rest from the product page, item packaging, or the supplier record you use internally.
Fit Check: Before You Issue or Wear Them
For maintenance buyers and shop leads, fit should be checked before the glove goes into service.
- Check hand size: Confirm the wearer normally uses a medium glove size. If the fit history is unknown, have the user try it on.
- Inspect finger reach: The fingertips should seat without pulling tight at the end of each finger.
- Verify palm closure: The glove should close naturally without excess material bunching in the palm.
- Check wrist security: Make sure the glove stays in place during grip and wrist rotation.
- Test tool control: Have the user hold the actual tool, fastener, or handle used on the job.
If any of these checks fail, do not assume the glove is acceptable for production work. Move to the correct size or a different glove style.
Troubleshooting and Support Checks
If the glove is not performing as expected, use a simple check/inspect/verify process.
Issue: Reduced grip
- Check: Is the glove surface wet, oily, or contaminated?
- Inspect: Look for smooth wear areas, hardened residue, or worn fingertips.
- Verify: Confirm whether the task requires a different grip texture or a cut-resistant glove with a different palm construction.
Issue: Hand fatigue or poor dexterity
- Check: Is the glove the correct size for the wearer?
- Inspect: Look for seam tightness, restricted finger movement, or excessive bulk in the palm.
- Verify: Confirm whether the anti-vibration design is appropriate for the tool and exposure pattern. Unknown (Verify).
Issue: Premature wear
- Check: Are the gloves being used on sharp edges, abrasive surfaces, or hot parts?
- Inspect: Check thumb crotch, fingertips, seams, and palm contact zones.
- Verify: Confirm whether the job requires a more durable glove construction or a different PPE control.
Product and Parts Breakdown
This item is not presented here as a modular spare-parts assembly. Based on the available source data, there is no verified replacement-parts list, service kit, or component breakdown. Use the product as a finished glove item unless the supplier provides an official parts reference. Unknown (Verify).
If you manage inventory, record these fields at receipt:
- full product name
- size
- pack count
- supplier reference or ASIN
- date issued
- job assignment
This helps with traceability when a user reports fit issues or early wear.
How to Decide If It Belongs in Your PPE List
Use the glove only if the job hazard assessment supports it. For example, a mechanic’s glove may be acceptable for general handling, maintenance, and some impact-prone hand tasks. That does not mean it is correct for every hot-work, cut hazard, chemical exposure, or rotating-equipment task.
- Check the task hazard.
- Inspect the glove construction and condition.
- Verify that the glove matches site PPE requirements.
If you need a related reference point for glove selection within the Black Stallion line, see this internal guide: Black Stallion GX5015 TIG/Mechanics Gloves Review & Buying Guide (L & XL).
Safety Notes
- Do not use worn, torn, or contaminated gloves.
- Do not assume anti-vibration naming means the glove reduces every hand-tool hazard.
- Keep gloves away from rotating machinery where entanglement is possible.
- Do not use gloves as a substitute for guarding, lockout/tagout, or tool maintenance.
- If heat, chemical splash, cut risk, or electrical exposure is present, verify a task-specific glove before use.
FAQ
Q: Is the GX100M sold as a pack of one?
A: The provided product title identifies a pack of one.
Q: What materials does it use?
A: Unknown (Verify). The provided source data does not confirm the exact material build.
Q: Is it approved for all mechanic and maintenance tasks?
A: No. Verify the hazard assessment, tool type, and site PPE requirements before use.
Q: Can I treat this as a replacement-parts item?
A: No verified replacement-parts breakdown is available here. Treat it as a finished glove product unless the supplier provides an official parts reference.
Sources Checked
- Provided product reference: Black Stallion GX100M, Medium Tool Handz Anti-Vibration Mechanic’s Gloves, Pack of (1) B007RFBRXU
- Provided internal link: Black Stallion GX5015 TIG/Mechanics Gloves Review & Buying Guide (L & XL)
No WSP lookup page was provided for this draft. No filler metal finder page was provided for this draft.
Matched Replacement Option
No products found.
Disclosure: As an Amazon Associate, Weld Support Parts may earn from qualifying purchases.
