Tag: AC TIG
-
Square Wave 205 TIG Cup Size Selection Guide: Standard Cup, Gas Lens, and Stickout Checks
For a Lincoln Square Wave 205 TIG setup, cup size controls how well argon shields the tungsten and weld puddle. Use a smaller cup when access is tight, amperage is low, and…
-
Square Wave 205 TIG Torch Overheating Causes: Amperage, Duty Cycle, Consumables, and Cooling Checks
If the TIG torch on a Lincoln Square Wave 205 gets too hot to hold, discolors the cup, burns collets, loosens tungsten, or overheats the torch head, stop and check amperage, duty…
-
Square Wave 205 TIG Gas Lens vs Standard Collet Body: When to Use Each Setup
On a Lincoln Square Wave 205, a gas lens is not an automatic upgrade for every TIG weld. Use a gas lens when you need smoother argon coverage, longer tungsten stickout, better…
-
Square Wave 205 TIG Arc Wandering Causes: Tungsten, Gas, Ground, and AC Setup Checks
If a Lincoln Square Wave 205 TIG arc wanders, splits, flutters, or refuses to stay centered on the joint, start with tungsten condition and torch setup before blaming the machine. Arc wandering…
-
Lincoln Square Wave 205 TIG Tungsten Contamination Troubleshooting
If the tungsten on a Lincoln Square Wave 205 turns black, balls unevenly, grows a dirty tip, spits into the puddle, or makes the TIG arc wander, stop and correct contamination before…
