Welding guides
Parts, troubleshooting, equipment, and life in the trade. Browse by topic or search below.
-
CK T187GL 1.5% Lanthanated Tungsten Electrode 1/8″ X 7″, 10 Pack: Application and Buying Checks
CK T187GL 1.5% Lanthanated Tungsten Electrode 1/8" X 7", 10 Pack is a standard TIG support item for shops that need a larger-diameter tungsten for stable arc starts and controlled current delivery.…
-
The Mudroom Shift: How Welders Leave the Shop at the Door
The last task of a welding shift happens at home: boots find their tray, workwear stays separate and the person inside the gear changes roles.
-
Hypertherm Duramax Hyamp Hand Torch Parts Breakdown: Replacement Decision Guide
If you service plasma cutters in the field or on the shop floor, the Hypertherm Duramax Hyamp hand torch is a parts-and-wear-item system, not a single replace-all assembly. This guide gives you…
-
CK T187GC2, 2% Ceriated Tungsten Electrode 1/8″ x 7″ (10 Pack): Application and Buying Checks
Buying checks for CK T187GC2 2% ceriated tungsten: confirm electrode dimensions, torch fit, preparation, and procedure requirements before ordering.
-
Before the Hook Comes Tight: The Trust Between Welders and Riggers
Before a fabricated frame leaves the dunnage, shop knowledge meets rigging judgment. The best lifts begin with clear roles, shared attention and the confidence to stop.
-
Hypertherm Duramax Hyamp Full-Length Machine Torch Parts Breakdown: Compatibility Checks Before Ordering
Ordering torch parts for a Hypertherm Duramax Hyamp full-length machine torch should start with identification, not assumptions. The wrong lead, torch body, retaining component, or consumable family can stop production and create…
-
Radians Safety Glasses Mirage USA Smoke Frame and Lens MR0120ID, Order of 12: Application and Buying Checks
Shop safety eyewear fails for simple reasons: wrong fit, poor lens condition, and buying by appearance instead of job use. The Radians Safety Glasses Mirage USA Smoke Frame and Lens MR0120ID, Order…
-
The Second Set of Eyes: Why Good Welding Inspectors Belong to the Work
Good welding inspection is not a showdown after the arc. It is a second set of eyes connecting the drawing, the finished joint and a decision the whole shop can trust.
