Selecting TIG welding accessories can make or break your results. The right setup improves arc stability, shielding coverage, and long-term torch reliability—while the wrong parts waste time and money.
Key Takeaways
- Match collet, cup, and tungsten size to your torch series
- Gas lens kits improve shielding and weld quality for most jobs
- Verify compatibility for 17/18/26 vs. 9/20 series torches
- Tungsten type and prep matter for steel, stainless, and aluminum
- Accessory kits offer value—but confirm genuine components
Performance & Use
TIG welding demands tight arc control and consistent shielding gas coverage. Accessories such as gas lens kits and high-quality alumina cups help maintain a stable arc and reduce atmospheric contamination.
Gas lenses straighten gas flow and allow greater tungsten stick-out without losing coverage. This is especially useful for stainless steel and critical welds where porosity is unacceptable.
For aluminum, larger cups are common to improve shielding. Pure tungsten was historically used on AC aluminum, but many welders now use 2% lanthanated or other modern blends depending on machine settings. Always verify manufacturer recommendations for your specific power source.
Durability & Build
Accessory quality varies significantly. Genuine parts from manufacturers such as CK Worldwide and Weldcraft generally provide better fit and longer service life than low-cost generics.
Inspect:
- Cups for cracks or uneven glazing
- Collets for proper tungsten grip
- Threads for clean engagement
Avoid mixing brands unless compatibility is confirmed. Poor fit leads to gas leaks and unstable arcs.
Power / Specs
| Accessory | Typical Range | Notes |
|---|---|---|
| Collet Size | 1/16″–1/8″ | Must match tungsten diameter |
| Cup Size | #4–#8 (standard), #12+ (large gas lens) | Process dependent |
| Gas Lens | Standard or Large | Improves shielding coverage |
| Tungsten Type | 2% Thoriated, 2% Lanthanated, Pure | Match material & polarity |
| Torch Series | 17/18/26, 9/20 | Not interchangeable |
Unknown (Verify):
- Exact kit contents
- Part numbers
- Included accessories
- Country of origin
- Warranty details
Who It’s For
Best for welders upgrading from a basic TIG setup, professionals seeking improved arc control, and anyone welding stainless or aluminum where shielding matters.
Not necessary for shops running MIG or stick only.
Quick FAQ
Q: Can I use any collet with my torch?
No. Torch series and tungsten size must match. 17/18/26 components do not fit 9/20 torches.
Q: Do gas lens kits fit all torches?
No. Confirm series and thread type before ordering.
Q: What tungsten is recommended for stainless?
2% lanthanated or 2% thoriated are common. Verify based on alloy and polarity.
Q: Are generic kits reliable?
Quality varies. Genuine parts are preferred for consistent fit and safety.
Q: Does cup size affect weld quality?
Yes. Larger cups improve shielding but require increased gas flow.
Q: How do I confirm compatibility?
Reference your torch manual or supplier documentation before purchase.
Safety Notes
- Wear ANSI Z87.1 safety glasses when grinding tungsten
- Use a dedicated tungsten grinding wheel to prevent contamination
- Provide proper fume extraction when welding stainless
- Turn off power before changing torch components
