Some tools outlast every trend. The Fibre-Metal Pipeliner 110PWE is one of them—unchanged in all the right ways since long before “auto-darkening” was even a buzzword. It still shows up on job sites where heat, grit, and tight quarters ruin fancy tech helmets. Pipe welders keep reaching for it because it just works.
Buy it here
| Feature | Details |
|---|---|
| Shell Material | SuperGlas Plus fiberglass |
| Viewing Area | 2 × 4.25 in. passive lens |
| Default Shade | #10 |
| Weight | Approx. 1.3 lbs |
| Headgear | Adjustable ratchet suspension |
| Certifications | ANSI Z87.1 / CSA Z94.3 |
| Color | White reflective finish |
The Pipeliner’s SuperGlas Plus shell takes abuse few helmets survive. It shrugs off sparks, radiant heat, and drops without cracking. Fiberglass construction gives it rigidity while staying lighter than most composite models. The matte white surface also reflects radiant heat—a small thing that matters when you’re kneeling beside 600 °F pipe.
Fibre-Metal designed the Pipeliner to hang low and center, keeping the lens close to your face and the weight off your neck. The headgear ratchet system is simple but steady once dialed in. Many welders upgrade it with a 3M or Huntsman headgear for extra padding or better micro-adjustment. A bit of ingenuity—adding a sweatband or swapping to elastic webbing—turns it from “barely tolerable” to “all-day wearable.”
It ships with a fixed shade 10 passive lens, using the classic 2 × 4.25 in. window. Replacements are cheap and everywhere. For brighter arcs or TIG work, welders often switch to shade 9; for heavy stick or flux-core, shade 11 or 12 keeps the eyes calmer. Gold-coated lenses improve clarity and color tone. Cheater lenses slip right behind the filter plate without modification.
This helmet practically invites customization:
Because every part is simple, nothing costs much or takes long to replace.
Auto-darkening wins for convenience, but the Pipeliner still dominates in reliability. No batteries, sensors, or lag time—just instant shade when the arc strikes. Visibility under low-light conditions is naturally wider than most think once the lens is tuned right. Field welders favor it because it can’t “flash” them when sunlight or reflections confuse sensors. If you do mostly fabrication indoors, pairing this with an auto-dark helmet for setup and tack work covers both worlds.
| Pros | Cons |
|---|---|
| Virtually indestructible SuperGlas Plus shell | Fixed-shade lens |
| Light, well-balanced feel | Narrow viewing area |
| Low cost for parts and lenses | No grind mode or electronics |
| Trusted by pipe welders worldwide | Limited headgear adjustability |
For welders who love the Pipeliner form factor but want a different finish, the Jackson Safety 14301 PL280 Pipeliner Welding Hood – Arc Weld Store offers a sleek black design with comparable fit and lens size. It’s slightly heavier but comes with a comfortable headgear out of the box. Both helmets share that same old-school fiberglass durability and tight seal, but Jackson’s darker finish hides grime better and gives a more modern look.
You can find both versions side by side at Arc Weld Store — ideal if you’re comparing fit, weight, and lens options before buying.
If your work is dirty, cramped, or outdoors, this helmet still outperforms plenty of pricier choices. It’s a pure tool: durable, minimal, and easy to maintain. For many welders, the Pipeliner 110PWE isn’t nostalgia—it’s insurance against downtime.
Order direct from Arc Weld Store for genuine Fibre-Metal gear and fast shipping.
Leave a Reply